THREE PHASE SQUIRREL CAGE INDUCTION MOTOR WITH DEEP ROTOR BARS IN TRANSIENT BEHAVIOUR: A PERFORMANCE ANALYSIS
Abstract
Full Text:
PDFReferences
Repo A.-K., Rasilo P., and. Arkkio A, (2008), ‘Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine’, IET Elect. Power Appl., vol. 2, No. 3, pp. 183 -192
Levi E., (1996), Main flux saturation modeling in double-cage and deep-bar induction machines, IEEE Trans. Energy Conversion, vol. 11, No. 2, pp.305 – 311
Pedra J, Sainz L, (2006), ‘Parameter estimation of squirrel-cage induction motors without torque measurements’, IEE Proc. Elect. Power Appl., vol. 153, no.2, pp. 87 -94
Verghese G. C., Lang J. H., and Ä Onder M. K., (1999), ‘Generalizing the Blondel-Park transformation of electrical machines: Necessary and sufficient conditions’, IEEE Trans. Circuits and Systems, Vol. 36, No. 8, 1058-1067
Atkinson D.J., Finch J.W. and Acarnley P.P., (1996), ‘Estimation of rotor resistance in induction motors, IEE Proc. Elect’, Power Appl., vol. 143, no.1, pp. 87 -94
Rik W.A and De Doncker A., (1992), ‘Field-Oriented Controllers with Rotor Deep Bar Compensation Circuits’, IEEE Trans. Industry Applications, vol. 28, No. 5, pp. 1062 – 1070
Jul-Ki Seok, and Seung-Ki Sul, (1998), ‘Pseudo rotor-Flux-Oriented Control of an Induction Machine for Deep-Bar-Effect Compensation’, IEEE Trans. Industry Applications, vol. 34, No. 3, pp. 429 – 434
Anderson P.M. and Fouad A.A., (2003), ‘Rotating (D-Q) Transformation and Space Vector Modulation Basic Principles', McGraw- Hill Companies INC
Park R.H., (1989), ‘Two Reaction Theory of Induction Machines’, AIEE Transactions 48:716-730
Vaimann T, Kallaste A, and Kilk A, (2011), ‘Sensor less Detection of Induction Motor Rotor Faults Using the Clarke Vector Approach’, Scientific Journal of Riga Technical University: Power and Electrical Engineering 29 4-21.
Ansari A A, and Deshpande D M, (2010), ‘Mathematical Model of Asynchronous Machine in MATLAB Simulink’, A. Ansari et. al. / International Journal of Engineering Science and Technology Vol. 2(5), 1260-1267
Blödt M, Granjon P, and Raison B, (2008), ‘Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring’, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 4, APRIL 2008
Arya M K, and Wadhwani S, (2009), ‘Transient Analysis of Three Phase Squirrel Cage Induction Machine using Matlab’, International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622, Vol. 1, Issue 3, pp.918-922.
Yu L and Wong KN (1989), ‘Open and Short Circuit Behavior of Induction Motors’, (IEEE Conference Publications) 35-40.
Refbacks
- There are currently no refbacks.