Design and Implementation of a Temperature and Humidity Control System for a Poultry House Prototype
Abstract
This paper presents a Microcontroller based temperature-humidity measuring and control system which can be implemented in a poultry farm. The control of temperature and humidity have, overtime, become a major part of control systems operated in environment where these quantities are crucial entities. In this project, DHT11 temperature-humidity sensor is used for the sensing of the temperature and humidity of the poultry house, which is an input to the microcontroller. The microcontroller will get the temperature and humidity of the poultry from the temperature-humidity sensor and then compare it with the desired temperature for the poultry. If the measured temperature and/or humidity is not within the desired temperature and humidity of the poultry house, the control mechanism will be activated. The control of temperature and humidity is achieved through the use of some control mechanisms which include: fan, automated windows and heat source. The microcontroller used is the ATMEGA328p microcontroller. The temperature and humidity of the poultry is displayed on a Liquid Crystal Display (LCD). The result obtained is the control of the temperature and humidity of the poultry house.
Â
Full Text:
PDFReferences
Aborisade, D. O., and Stephen, O. (2014). Poultry House Temperature Control Using Fuzzy-PID Controller. International Journal of Engineering Trends and Technology (IJETT) – Volume Number - May 2014, 11(6), 310 - 314.
Corkery, Gerard., Ward, Shane., Kenny, Colum., and Hemmingway, Phil. (2013).Monitoring Environmental Parameters in Poultry Production Facilities. Computer Aided Processing Engineering – CAPE Forum 2013. Institute for Process and Particle Engineering, Graz University of Technology, Austria.
Dong-lin, Zhang., Mei, Li Xin Dai. and Lei-wang, Quan, (2010). Design of the Low Cost Silkworm House Temperature and Humidity Automatic Control System Based on DHT11. Chinese National Knowledge Infrastructure Project
Tianlong, Ni (2010).Application of Single Bus Sensor DHT11 in Temperature Humidity, Measure and Control System. Chinese National Knowledge Infrastructure Project.
Electronics Hub DHT humidity sensor on Arduino. [Online] Retrieved from: http://www.electronicshub.org/dht11-humidity-sensor-arduino/
Elijah, Obayelu. A., and Adedapo, A. (2006). The effect of Climate on Poultry Productivity in Ilorin, Kwara State, Nigeria. International Journal of Poultry Science, 1061-1068.
Fairchild, Brian. (2012). Environmental Factors to Control When Brooding Chicks. Retrieved from The University of Georgia Cooperative Extention: http://www.extension.uga.edu/publications/detail.html?number=B1287 [ Accessed 23/08/2017]
Goswami, A., Bezboruah, T., and Sarma, K. C. (2009). Design of An Embedded System For Monitoring and Controlling Temperature and Light. International Journal of Electronic Engineering Research, I(1), 27–36.
Idachaba, F. (2010). Design of Intel 8751 microcontroller based system for monitoring and control of a thermal process. IETE journal of research, 56(4), 189-192.
Joshi, M., and More, V. (2012). Real Time Cost Effective Temperature Controller. International Journal of Electonics and Communication Engineering and Technology (IJECET), 271-277.
Khairurrijal., Abdullah, Mikrajuddin., and Budiman, Maman. (2008). Home-Made PIC 16F877 Microcontroller-Based Temperature Control System for Learning Automatic Control. Wiley Periodicals Inc.
Levărdă, B., and Budaciu, C. (2010). The Design of Temperature control System Using Pic18f4620.
Markande, S., and Katti, S. (2004). Microcontroller based Temperature Controller-implementation of Fuzzy Logic. IE(I) Journal-CP.
Wikipedia. (2017). Liquid-Crystal Display.[Online]
Retrieved from: https://en.wikipedia.org/wiki/Liquid-crystal_dislay
[Accessed 03/12/2017]
Ying-mei, Han. & Jian-ping, Zhao (2011).Design of Temperature Humidity Wireless Sensor Network Node based on Dht11. Chinese National Knowledge Infrastructure Project.
Refbacks
- There are currently no refbacks.